Announcement

Collapse
No announcement yet.

F3-16000CL8/9T-6GBPS + Gigabyte GA-EX58-UD3R BIOS settings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F3-16000CL8/9T-6GBPS + Gigabyte GA-EX58-UD3R BIOS settings

    These settings are for any DDR3-2000 kit on the Gigabyte EX58-UD3R motherboard

    In MIT (MB Intelligent Tweaker):

    CPU Clock Ratio - 17x for 2.8GHz
    QPI Link Speed - AUTO
    Base Clock Control - Enabled
    BCLK Frequency - 167
    Performance Enhance - Standard
    Extreme Memory Profile - Disabled
    System Memory Multiplier - 12

    Uncore & QPI Features
    Uncore Frequency - 4008

    DRAM Timing Selectable - Manual

    CAS Latency Time - 9
    tRCD - 9
    tRP - 9
    tRAS - 24

    Enter these for the other three as well.

    Channel A Timing Settings

    Advanced Timings
    Command Rate - 2

    Advanced Voltage Control
    Load-Line Calibration - Disabled
    CPU Vcore - 1.32V
    QPI/VTT Voltage - 1.60V

    DRAM Voltage - 1.640V
    Rest to AUTO

    Thank you
    GSKILL SUPPORT
    Last edited by GSKILL TECH; 04-29-2010, 12:45 PM.

  • #2
    Won't boot

    I use this board rev 1.6 bios FB. I used those settings with this ram
    G.SKILL F3-16000CL9T-6GBRH Ripjaws 6GB 3X2GB DDR3-2000 CL9-9-9-24

    It won't post as all.
    I use a D0 core i7 920

    I also tried to set it to 1600mhz with everything the same except the system memory multiplier down to 8, it still won't post. What do you suggest? I have decent cooling, haf 932 case with hyper 212 with 2 gelid fans, blow and suck. I am running this DDR3-2000 at 1066........ Even if it doesn't run at 2000...... At least make it run at 1600 with 8-8-8-20 or something...

    Thanks...

    Comment


    • #3
      Try these settings:

      CPU Clock Ratio - 18x
      QPI Link Speed - AUTO
      Base Clock Control - Enabled
      BCLK Frequency - 160
      Performance Enhance - Standard
      Extreme Memory Profile - Disabled
      System Memory Multiplier - 10

      Uncore & QPI Features
      Uncore Frequency - 3200

      DRAM Timing Selectable - Manual

      CAS Latency Time - 9
      tRCD - 9
      tRP - 9
      tRAS - 27

      Enter these for the other three as well.

      Channel A Timing Settings

      Advanced Timings

      Command Rate - 2N

      Advanced Voltage Control
      Load-Line Calibration - Disabled
      QPI/VTT Voltage - 1.30V
      CPU PLL - 1.900V

      PCIE - AUTO
      QPI PLL - 1.300V
      IOH Core - 1.400V
      ICH I/O - 1.600V
      ICH Core - 1.300V
      DRAM Voltage - 1.640V
      Rest to AUTO

      Let me know how that goes. Also, try testing each stick individually to make sure you don't have a bad stick.

      Thank you
      GSKILL SUPPORT

      Comment


      • #4
        I am currently using this. However, there is no way I can get to 2000mhz, if I adjust to 950mhz, I can blue screen in windows

        In MIT (MB Intelligent Tweaker):

        CPU Clock Ratio - 20x for 3.6GHz
        QPI Link Speed - 36x
        Base Clock Control - Enabled
        BCLK Frequency - 180
        Performance Enhance - Standard
        Extreme Memory Profile - Disabled
        System Memory Multiplier - 10

        Uncore & QPI Features
        Uncore Frequency - 4000 or 3600

        DRAM Timing Selectable - Manual or quick

        CAS Latency Time - 9
        tRCD - 9
        tRP - 9
        tRAS - 27

        Enter these for the other three as well.

        Channel A Timing Settings

        Advanced Timings
        tRC - 27
        tRRD - 4
        tWTR - 4
        tWR - 8
        tRFC - 60
        tRTP - 4
        tFAW - 20
        Command Rate - 2
        Round Trip Latency - auto since I have no idea what this is

        Advanced Voltage Control
        Load-Line Calibration - Disabled
        CPU Vcore - Normal
        QPI/VTT Voltage - Auto
        CPU PLL - Auto

        PCIE - AUTO
        QPI PLL - Auto
        IOH Core -Auto
        ICH I/O - Auto
        ICH Core - Auto
        DRAM Voltage - 1.640V
        Rest to AUTO

        Comment

        Working...
        X