F3-16000CL9T-6GBTD + EVGA E758 / E759 / E760 / E761 BIOS settings

[GSKILL TECH]

These settings are for the EVGA E758 X58 SLI motherboard to operate the DDR3-2000 Trident Series

Frequency / Voltage Control:

CPU Clock Ratio - 17X
CPU Host Frequency - 167
CPU Uncore Frequency - 4000
Spread Spectrum - Disabled

Memory Feature (submenu)
Memory Control Setting - Enabled
Memory Frequency - 2000MHz / 2:12

tCL Setting - 9
tRCD Setting - 9
tRP Setting - 9
tRAS Setiing - 27
Command Rate - 2T
The rest can be AUTO.

Voltage Control (submenu)
CPU VCore - 1.30V
CPU VTT Voltage - +350mV
DIMM Voltage - 1.60V

CPU Feature (submenu)
Intel SpeedStep - Disabled
Turbo Mode Function - Disabled
CxE Function - Disabled
Execute Disable Bit - Enabled
Virtualization Technology - Enabled

Intel HT Technology - Enabled
Active Processor Cores - All

QPI Control Settings - Enabled
QPI Link Fast Mode - Enabled
QPI Frequency Selection - AUTO

Thank you
GSKILL SUPPORT

[Nietzschean]

EVGA upgrade from e760 to E770

I just pulled my old board out and installed this beast evga E770 classified 3, I tried the settings i was using with the E760 board i get no boot/ errors/ and BSD's. I heed help finding where to start. with this over clocking the ram. Right now the ram is set at standard 1066mhz. if I profile it i get 1992 mhz or if i manual it I get 2006 mhz. I emailed support they said try for 1866MHz. i have to QPI volt something but the settings dont seem to match. I ran MEMtest 86 from iso cd for 2 hours no problems I dont want to run it for 12/24 hrs with a ANTEC HCP-1200 and a gtx 580 ds oc.
where do we start....

seems evga used the same settings in their phoenix bios, but with the new additions they put on this board IDK why this is not working.
lets test small or if you have the Answer lay it on me. I know nothing of OC'ing. it voids warranties, I like lifetime RMA.

system specs
EVGA E770 MOBO
GSkill F3-1600cl9t-6gbtd
1x Intel I7-960, 3.2Ghz
2x intel 320 SSD 120 GB Raid 0 stripe
1x EVGA GTX 580 ds oc
1x ocz agility III 120 SSD
1x WDC 750 Black
1x WDC 1.5Tb Green
LG DVD/ BD burner
samsung DVD/rw
antec DF-85
Antec HCP-1200 pro
microsoft sidewinder x8 mouse / x6 keyboard
ASUS 24" monitor with HDMI 1080p
EVGA gaming mouse pad

[GSKILL TECH]

Settings are similar as above, but voltages may be different depending on motherboard and CPU, so you need to tweak those to see what yours need. CPU VTT is most important. It is best to work your way up, that way you know roughly how much voltage it may need.

Thank you
GSKILL TECH