Tweet
F3-16000CL9d-4GB2000MHZ GT1 kit does not run to specs
Forum hello again, yesterday i posted a thread concerning my new F3-1600 2000MHZ Ram Orb kit and today i cannot see my thread in the forum maybe did not upload correctly 
.The issue is that the sticks do not run at specs, this is ,from my point of view, clemency anacceptable from such a big company like G.Skill and for such an expencesive piece of equipment.
These modules according to specs are optimized and tested according to G.Skill to run at 2000MHZ and at 9-9-9-24 on the nVidia 7xx chipset.Well these sticks do run more than 1800Mhz pitty because i thought i bought a 2000Mhz Ram. I am posting details of my system specifications ,cofiguration and a bios template as follows
Model of the motherboard:Evga 790i Ultra with TRI Evga 260GTX in SLI configuration
Model of the memory:F3-16000CL9d-4GB2000MHZ GT1 RamOrb
Model of the CPU:Intel QX-6700
BIOS Version: P0 08
**System **
CPU Freq, MHz: 3600 GHZ
FSB Reference Clock, MHz: 450
CPU Multiplier: [8X]
PCle x16-1 & 16-2, MHz: [100]
PCle x16-3, MHz: [100]
SPPc->MCP Ref Clock, MHz: [200]
nForce SPP --> nForce MCP: [5X]
nForce SPP c-- nForce MCP: [5X]
**Spread Spectrum**
CPU Spread Spectrum: [Disabled]
HT Spread Spectrum: [Disabled]
PCle Spread Spectrurn(SPP): [Disabled]
PCle Spread Spectrurn(MCP): [Disabled]
SATA Spread Spectrum: [Disabled]
**FSB & Memorv Config**
FSB - Memory Clock Mode: [Linked]
FSB - Memory Ratio: Synced
FSB (QDR), MHz: 1800
Actual FSB (QDR), MHz: 1800
x MEM (DDR), MHz: ****
Actual MEM (DDR), MHz: 1800
P1: [Enabled]
P2: [Enabled]
**Memory Timing Setting**
Memory Timing Setting: [manual]
tCL (CAS Latency): 8
tRCD: 8
tRP: 8
tRAS: 20
Command Per Clock: [2T]
** Advanced Memory Settings **
tRRD: [7]
tRC: [44]
tWR: [12]
tWTR: [19]
tFAW: [33]
tREF: [7.7]
**System Voltages**
CPU Core: [1.456]
CPU FSB: [1.45]
Memory: [2.00]
nForce SPP: [1.45]
nForce MCP: [1.65]
GTLVREF Lane 0: [Auto]
GTLVREF Lane 1: [Auto]
GTLVREF Lane 2: [Auto]
GTLVREF Lane 3: [Auto]
**CPU Configuration**
Limit CPUlD Maxval: Disabled
Intel Speedstep: Disabled
xPPM Mode: [Native]
CPU Thermal Control: [Disabled]
C1E Enhanced Halt State: [Disabled]
Execute Disable Bit: [Enabled]
Virtualization Technology: [Disabled]
CPU Core 0: [Enabled]
CPU Core 1: [Enabled]
CPU Core 2: [Enabled]
CPU Core 3: [Enabled]
Hopping for a valuable input
.The issue is that the sticks do not run at specs, this is ,from my point of view, clemency anacceptable from such a big company like G.Skill and for such an expencesive piece of equipment.These modules according to specs are optimized and tested according to G.Skill to run at 2000MHZ and at 9-9-9-24 on the nVidia 7xx chipset.Well these sticks do run more than 1800Mhz pitty because i thought i bought a 2000Mhz Ram. I am posting details of my system specifications ,cofiguration and a bios template as follows
Model of the motherboard:Evga 790i Ultra with TRI Evga 260GTX in SLI configuration
Model of the memory:F3-16000CL9d-4GB2000MHZ GT1 RamOrb
Model of the CPU:Intel QX-6700
BIOS Version: P0 08
**System **
CPU Freq, MHz: 3600 GHZ
FSB Reference Clock, MHz: 450
CPU Multiplier: [8X]
PCle x16-1 & 16-2, MHz: [100]
PCle x16-3, MHz: [100]
SPPc->MCP Ref Clock, MHz: [200]
nForce SPP --> nForce MCP: [5X]
nForce SPP c-- nForce MCP: [5X]
**Spread Spectrum**
CPU Spread Spectrum: [Disabled]
HT Spread Spectrum: [Disabled]
PCle Spread Spectrurn(SPP): [Disabled]
PCle Spread Spectrurn(MCP): [Disabled]
SATA Spread Spectrum: [Disabled]
**FSB & Memorv Config**
FSB - Memory Clock Mode: [Linked]
FSB - Memory Ratio: Synced
FSB (QDR), MHz: 1800
Actual FSB (QDR), MHz: 1800
x MEM (DDR), MHz: ****
Actual MEM (DDR), MHz: 1800
P1: [Enabled]
P2: [Enabled]
**Memory Timing Setting**
Memory Timing Setting: [manual]
tCL (CAS Latency): 8
tRCD: 8
tRP: 8
tRAS: 20
Command Per Clock: [2T]
** Advanced Memory Settings **
tRRD: [7]
tRC: [44]
tWR: [12]
tWTR: [19]
tFAW: [33]
tREF: [7.7]
**System Voltages**
CPU Core: [1.456]
CPU FSB: [1.45]
Memory: [2.00]
nForce SPP: [1.45]
nForce MCP: [1.65]
GTLVREF Lane 0: [Auto]
GTLVREF Lane 1: [Auto]
GTLVREF Lane 2: [Auto]
GTLVREF Lane 3: [Auto]
**CPU Configuration**
Limit CPUlD Maxval: Disabled
Intel Speedstep: Disabled
xPPM Mode: [Native]
CPU Thermal Control: [Disabled]
C1E Enhanced Halt State: [Disabled]
Execute Disable Bit: [Enabled]
Virtualization Technology: [Disabled]
CPU Core 0: [Enabled]
CPU Core 1: [Enabled]
CPU Core 2: [Enabled]
CPU Core 3: [Enabled]
Hopping for a valuable input
Comment