Overclocked 2133MHz to 2400MHz in F3-2133C9D-8GAB

[jesse_cf]

Good afternoon friends, I have the following configuration:

i7 3770K
Biostar TZ77XE4
2133 CL9 2x4GB (F3-2133C9D-8GAB)

I want to overclock in my memories (F3-2133C9D-8GAB) but do not know how to do, I know you have to change speed (MHZ), latency and voltage, wanted to know how to do it, I'll be grateful that can help me.

[Tradesman]

If they have a decent BIOS, should just be able to enable XMP, select profile 1 and go

[jesse_cf]

If they have a decent BIOS, should just be able to enable XMP, select profile 1 and go

This kit is XMP 2133MHz, 2400MHz want to go to, want to know what settings I use.

[emissary42]

Depending on the chips used on your kit, i would try

10-12-12-28 / 10-12-11-28 / 10-11-11-28 at 1.65V
or
11-13-12-31 / 11-12-11-31 / 11-11-11-31 at 1.65V

If your lucky, the appropriate subtimings get set by the board itself. Otherwise you could try to recycle those from the XMP, they might be a bit tight for DDR3-2400 however. If you found a stable setting, try reducing Vdimm afterwards.

[jesse_cf]

Depending on the chips used on your kit, i would try

10-12-12-28 / 10-12-11-28 / 10-11-11-28 at 1.65V
or
11-13-12-31 / 11-12-11-31 / 11-11-11-31 at 1.65V

If your lucky, the appropriate subtimings get set by the board itself. Otherwise you could try to recycle those from the XMP, they might be a bit tight for DDR3-2400 however. If you found a stable setting, try reducing Vdimm afterwards.

Good morning, thanks for the help, have not tried to test those times you gave me, now calmer and when I get home from work I will perform tests with these times you passed me, I have not tested your tip because this Meanwhile I was unavailable, work and studies took me a long time, but today I do the tests and then post the result here, thanks.

[emissary42]

Good luck then!