Mobo : Asrock extreme 3 gen 3 z68
Ram : Ripjaws X Series 16GB (4 x 4GB) DDR3 2133 Model F3-17000CL11Q-16GBXL
I was using the original bios version (1.X), and all I had to do was enable xmp, and set ram to 2133.
I updated to version 2.3 yesterday (also attempted 2.1 and 2.2) to give me the extra oc features for the cpu, and found that I couldn't get it to run past 1600.
I found a few threads here, and attempted to follow those (set voltage to 1.65, which i could get around, but not exact) manually set timings, trying other voltage settings etc.
I was able to get 2 of them in and oc to 2133 just by enabling one of the xmp profiles. If I put one stick in slot A1 and one in B1, it will work. If I put them in A1 and A2, it will not post. A1,A2,B1 will also not post.
I was looking for some help to get all 4 sticks running at 2133, and so here I am.
Ram : Ripjaws X Series 16GB (4 x 4GB) DDR3 2133 Model F3-17000CL11Q-16GBXL
I was using the original bios version (1.X), and all I had to do was enable xmp, and set ram to 2133.
I updated to version 2.3 yesterday (also attempted 2.1 and 2.2) to give me the extra oc features for the cpu, and found that I couldn't get it to run past 1600.
I found a few threads here, and attempted to follow those (set voltage to 1.65, which i could get around, but not exact) manually set timings, trying other voltage settings etc.
I was able to get 2 of them in and oc to 2133 just by enabling one of the xmp profiles. If I put one stick in slot A1 and one in B1, it will work. If I put them in A1 and A2, it will not post. A1,A2,B1 will also not post.
I was looking for some help to get all 4 sticks running at 2133, and so here I am.
Comment