Announcement

Collapse
No announcement yet.

F3-12800CL9D-8GBSR + ASUS M4A89GTDPRO/USB3 + AMD Phenom II 965 BE @3.8 Ghz

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F3-12800CL9D-8GBSR + ASUS M4A89GTDPRO/USB3 + AMD Phenom II 965 BE @3.8 Ghz

    I'm trying to stabilize the system but without success, tried a good amount of configurations, some of them lasted to me for 12 Hrs without any problems but then after that i get the pc ON and bam, i get a BSOD.
    I hope that you can help me out with this. I also followed this manual: http://www.gskill.us/forum/showthread.php?t=7688
    Also my BIOS is updated.
    Here's the MB page: http://www.asus.es/Motherboards/AMD_...89GTD_PROUSB3/
    Also, there's 2 KITs in there (16 GB in total)
    I have attached photos of my BIOS.
    Attached Files
    Last edited by rAv3nzZ; 03-06-2013, 07:56 AM.

  • #2
    Let's try NB voltage 1.34 and the DRAM voltage 1.57


    Pls offer comments on support I provide, HERE, in order to help me do a better job here:

    Tman

    Comment


    • #3
      It became even worse

      Comment


      • #4
        Couple of possibles, you may have two sets that simply don't want to play together, might try raising the tRFC to the next stop, 160 sounds a bit low, Other main possible is your CPU may not be able to carry 4 sticks at 1600 (which isn't unusual either)...might try a bit more voltage to the CPU (+ 0.04 or so)


        Pls offer comments on support I provide, HERE, in order to help me do a better job here:

        Tman

        Comment

        Working...
        X