Announcement

Collapse
No announcement yet.

F2-6400CL5D-2GBNQ With ASUS M3A32-MVP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F2-6400CL5D-2GBNQ With ASUS M3A32-MVP

    Hello, I am currently trying to use

    2 x G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-2GBNQ

    1 x ASUS M3A32-MVP Deluxe/WiFi AM2+/AM2 AMD 790FX ATX AMD Motherboard

    1 x AMD Phenom 9600 Agena 2.3GHz Socket AM2+ 95W Quad-Core Processor Model HD960ZWCGDBOX

    When I run the first set of F2-6400CL5D-2GBNQ the computer boots and runs fine, but if i try to use the second set, either by itself or both together, I get an error

    Bank Interleave Requested but not Enabled.

    I have checked through the Bios and made sure that bank interleave is indeed enabled at every spot i can find to enable it.

    Any help would be appreciated.

  • #2

    there is something i am not sure:

    When I run the first set of F2-6400CL5D-2GBNQ the computer boots and runs fine, but if i try to use the second set, either by itself or both together, I get an error
    Do you mean you install both sets or just the 2nd set?

    Comment


    • #3
      Either. Both sets, and just the 2nd set cause the error.

      Comment


      • #4

        ok, please try just one module from 2nd set and make sure the voltage of memory is set on 1.9v in bios.

        Comment


        • #5
          Sorry about the delay. With school starting back up my time has become quite limited. I tried 1 module from the second set, making sure the bios is set to 1.9V, and both modules still produced the error.

          Comment


          • #6
            it seem the second set is defective
            just send back to us for RMA
            thanks


            G.S

            Comment

            Working...
            X